For anyone who owns a welder and a free Saturday
1,200+ ready-to-build plans, every cut list, every weld order.
Build it Saturday. Sell it before the month is out.
You are not short on skill. You are short on numbers: what to cut, how much steel to buy, in what order to weld it, and what to charge when someone asks. That is all this is, 1,200 times over, in inches and millimetres.
Steel in: $475 · Left in your pocket: $1,125
Steel in: $1,180 · Left in your pocket: $2,540
Those are steel costs against what comparable builds sell for second hand in the US and Australia, not a promise of income. What you make depends on what you build and what you charge. The plans, the cut lists and the suggested prices are the part we hand you.
$583 if you bought it piece by piece you pay US$ 27 today
Not just PDFs: a full video welding course is included. And 4 extra bonuses, today only, Friday, November 20.
Lifetime money-back guarantee and free lifetime updates. You keep the files either way.
1,200+ complete metal fabrication plans. Every dimension called out, a cut list totalled in 20 ft sticks and 6 m lengths, and a numbered weld order. In inches and millimetres.
Downloaded in 2 minutes. First cut within the hour. A finished build by Sunday night.
Pick a build → print the cut list → buy exactly that steel → weld in order
The welding was never the hard part. The plan was.
Read this first
You own the gear and it sits there. The welder is paid for. What is missing is a sheet of paper with the right numbers on it.
You waste steel guessing. One bad measurement and a whole 20 ft stick goes in the offcut pile, along with your Saturday.
You could build things people would pay for, but you never know which builds actually sell, or what to charge for them.
You want to finish something this weekend, not start another project that stalls at the hard joint.
If you nodded at two of those, keep reading. This page was built for you.
Proof, not promises
This is what every one of the 1,200 plans looks like. Tap the unit switch. That is the whole difference between building on Saturday and doing maths at the steel yard.
Every plan carries its own cut list, material list and weld sequence. This is a simplified preview. The file you download is a full printable sheet.
Because you would never use them. Packs that brag about "4,000+ projects" are usually a dumped folder of scraped images with no dimensions on half of them. We cut ours down to the builds that are worth your weekend, and every single one is complete. If a plan does not have a full cut list, it is not in here.
Inside the library
Furniture, trailers, gates, racks, smokers and more. Every one with its numbers on it.
No mockups
Straight out of the files. Nothing redrawn for this page.
What's inside
Counts reflect the current library. New builds are added every month, free for you, forever.
One payment. No subscription. Nothing to cancel.
What changes
Cut lists are totalled in the lengths the yard actually sells, 20 ft sticks and 6 m lengths, so you order what you need and nothing more.
Inches and millimetres printed side by side on every drawing. Tube sizes in gauge and in mm wall thickness. Nothing to convert with oily hands.
Every plan is tagged with a realistic build time and a skill level, so you pick something you can actually close out before Sunday night.
Smokers, trailers, gates, racks. The projects your mates notice, and the ones they start asking you to build for them.
How it works
Filter by category, build time, skill level or the tools you actually own.
One page: every length, every angle, every piece of stock, totalled for the steel yard.
Follow the numbered weld sequence so nothing warps and nothing ends up out of square.
Then pick the next one. Or quote it for someone, because the pricing kit is in the bonuses.
The maths nobody shows you
Not a promise of income. Just steel prices and what these actually sell for second hand. Pick a build and look at the gap.
Steel figures are typical US and AU retail; resale figures are what comparable builds list for. Your local prices will vary.
The whole library costs less than the offcut you waste guessing once. You do not have to sell anything for it to pay. But if you build one gate for a neighbour, you have covered it about fifteen times.
Not just PDFs
Your plans come with Weld Like a Pro, a full video welding course.
Included today, at no extra cost
Plans tell you what to build. These tell you how to weld it properly, what to charge for it, and which builds are worth your steel. You get all twelve with today's order.
Type in your build, get back exactly how many sticks to buy and how to cut them with the least waste. The spreadsheet does the nesting for you, in feet or metres.
Value $39 FREE TODAY
The formula shops use: material, consumables, shop rate, margin. Includes a quote template you can send from your phone and the three lines that stop people haggling you down.
Value $49 FREE TODAY
One page you run through before the first cut. Squareness, kerf allowance, tape from the right end, fit-up gap. It is the difference between a frame that sits flat and a week of grinding.
Value $19 FREE TODAY
Prep, primer, paint and rust-proofing that survives a winter outdoors. What to use on a gate, on a trailer and on a smoker, and why the wrong primer peels in six weeks.
Value $29 FREE TODAY
Every tool you actually need, in the order to buy it, with what to skip. Built for a garage or a shed, not a production floor. Includes the cheap jigs that replace expensive gear.
Value $25 FREE TODAY
The forty builds from the library with the widest gap between steel cost and what they sell for, ranked. Trailers, gym racks, gates and fire pits, with a target price next to each one.
Value $59 FREE TODAY
Where to list it, how to photograph it so it looks worth the money, what to say to the first buyer, and a day-by-day plan to go from first build to first paid job in a month.
Value $45 FREE TODAY
The one that makes everything else work. A full welding course on video, from zero, so the plans turn into builds you are proud to show.
Value $67 FREE TODAY
Straight flights, landings, porch and balcony railings, handrails and balusters. The jobs homeowners call a welder for, with rise, run and post spacing already worked out.
Value $39 FREE TODAY
Swing and sliding driveway gates, fence panels, privacy screens and pergolas. Bigger tickets than a farm gate, same cut list and weld order format.
Value $39 FREE TODAY
Carport, shed frame, greenhouse, gazebo, garden beds, heavy workbench and rolling tool storage. Ten complete structure sets, each with its steel order and a suggested selling price.
Value $49 FREE TODAY
120 photo pages you hand a customer so they point at what they want. No more describing a gate with your hands. They pick the build, you open the plan.
Value $45 FREE TODAY
Bonuses are delivered with the library, in the same download. Total bonus value: $504.
We didn't write these. They did.
Real builds from people who downloaded the library, picked a plan and cut steel.
Sent in by customers
Real garages, real driveways, real steel. Photos our customers sent us while building from the plans.
Who put this together
Every plan was checked against three things before it made the cut: does it have complete dimensions, does the cut list add up to buyable stock, and can someone with a small MIG and an angle grinder actually build it. Anything that failed one of the three was left out. That is why this is 1,200 plans and not 5,000.
Everything you get today
US$ 99
US$ 27
You save US$ 72 today
One-time · no subscription · instant download
4 extra bonuses included today only, Friday, November 20
Other packs split this into a basic, a pro and a complete version. Here the full library, all 12 bonuses and the monthly new plans are in for US$ 27. Nothing is held back for a higher tier.
Secure checkout · card & Apple Pay · instant access by email
Download it, open the plans, pick a build. If at any point you do not have something you are happy to show people, or you just decide it is not for you, email us and we refund the whole US$ 27. No deadline. You keep the files. We would rather you tell us what was missing. And every update we add to the library is yours, free, for life.
Questions
It is sitting there right now. The only thing standing between it and a finished trailer is a sheet of paper with the right numbers on it. That costs US$ 27, once.
Get Instant Access for US$ 27 1,200+ plans + 12 bonuses · Lifetime guaranteeFounding price while the first 100 spots last.
P.S. The half-built thing in the corner is not there because you cannot weld. It is there because nobody ever handed you the numbers. That is a US$ 27 problem.
P.P.S. If you download it, open three plans and decide it is not for you, email us any time and keep the files anyway. You genuinely cannot end up behind on this.